Centering vise holder

EM-Tec CV1 large centering vise SEM sample holder

Order CV1 centering vise holder (pin)   |   Order CV1 centering vise holder (M4)   |   Order addition parts

Introduction   

The EM-Tec CV1 large centering vise SEM sample holder is available with pin stub and with an M4 threaded hole.

#1- EM-Tec CV1 centering vise SEM sample holder for up to 110mm closed

#2- EM-Tec CV1 centering vise SEM sample holder for up to 110mm open

#3- EM-Tec CV1 centering vise SEM sample holder extended size closed

#4- EM-Tec CV1 centering vise SEM sample holder extended size open

The EM-Tec CV1 large centering vise SEM sample holder comprises a unique advantage. It keeps the sample always clamped in the centre of the holder. Both vise clamp jaws simultaneously move away or to the centre of the holder at the same time.

The EM-Tec CV1 large centering vise clamp includes two base plates on which the vise jaws can be re-positioned for optimum sample compatibility.  The brass dual vise spindle is located underneath the baseplates with knurled handles at both ends. The spindle can be operated from either side. One side includes a removable spindle extension to provide better grip when opening the centering vise. Made from vacuum grade aluminium and brass to provide dry lubrication. The vise jaws are mounted on the base with brass mounting screws.
Features of the EM-Tec CV1 large centering vise SEM sample holder are:

  • provides firm grip for large and heavy samples
  • automatically holds the sample in the centre of the SEM stage
  • easier navigation from the centre of the SEM
  • positionable vise jaws on the base plate for optimum sample compatibility
  • standard stage clamps from 0 to 110mm
  • spindle extension can be removed to reduce overall size
  • optional extension base plates allows clamping from 0 to 155mm
  • standard vise jaws with triple grooved side and smooth side
  • optional vise jaw with single 120° groove for round samples

The EM-Tec CV1 entering vise is a heavy duty sample holder intended for use on SEMs with large chambers and stages with a stage travel distances of 80mm or more. With a spindle travel of 42mm and positionable vise jaws the standard clamping ranges are 0-42mm, 34-78mm and 68-110mm. With the optional extension plate the additional clamping range are 102-144mm and 113-155mm

Specifications of the EM-Tec CV1 large centering SEM sample holder

Base plate size 40x40mm (2x)
Vise jaw VC3 size 12x40x6mm (2x)  
Spindle travel  42mm
Standard interspacing  17mm 
Standard clamping capacity 0-110mm
Overall size closed 106x40x34mm
Overall size open  122x40x34mm
Extension plate size 22.5x40mm (2x)
Extended interspacing  11mm
Extended clamping capacity 0-155mm
Overall extended size closed 146x40x34mm
Overall extended size open 167x40x34mm

The EM-Tec CV1 large centering vise SEM sample holder is available with pin stub and with an M4 threaded hole.

Technical Support Bulletin: EM-Tec CV1 large centering vise.

5 Item(s)

5 Item(s)