EM-Tec Multiple pin stub holders

Order Multiple pin stub holders (pin)   |   Order Multiple pin stub holders (M4)   |   Order 4 pin stub holder (JEOL)

Introduction   

EM-Tec multiple pin stub holders

1: #AU-12-000346 EM-Tec P6/45 multi pin stub holder Ø45° for 6 pin stubs, Ø35x14mm with M4 thread.

2: #AU-12-000219 EM-Tec P12 multi pin stub holder for 12 pin stubs, Ø62x10.5mm with pin.

The Em-Tec multiple pin stub holders are an efficient and cost-effective way to load multiple pin stubs with specimens in the SEM.  Saves time, allows multi sample processing or quickly comparing samples against each other. Intended for holding the standard 12.7mm (1/2”) pin stubs, although the larger 25.4mm (1”)pin stubs can be used on the holders for 6 pin stubs or more.  All the positions on the EM-Tec multiple pin stub holders for 6 pin stubs or more are numbered for easy identification and. Pin stubs are securely  held with small M3 stainless steel set screws for the multi pin stub holders up to 12 pin stubs; an allen key is included. On the 29 and 49 multi pin stub holders, the pin stubs are held with an integrated stainless steel spring.  The 6 and 8 multi pin holders comprise engraved crossed lines to assist with directional navigation. They are all made from vacuum grade aluminium and have undergone a final cleaning step which results in a satin surface finish. Available with:

  • standard pin to fit on SEMs which use the standard pin; FEI, Philips, Tescan, Phenom, Aspex, RJLee,      AmRay, Cambridge Instruments, Leica, CamScan, Aspex, ETEC and Novascan SEMs
  • M4 threaded hole; compatible with Hitachi SEMs, FESEMs and table top SEMsand with the EM-Tec versatile SEM stage adapters
  • 32mm JEOL SEM stub format, compatible with 32mm stub holders on JEOL SEMs

Additionally there are two 45 degrees pre-tilt multi-pin holders available:

  • 3 x 45° pin stub holders
  • 6 x 45° pin stub holders           

Both with pin and M4 threaded hole.

Special version for 7 x 25.4mm pin stubs is available as well: EM-Tec P7

 

 

 

Capacity, size and compatibility of the EM-Tec multi pin stub holders:

Product numbers

Name

Pin stubs

Dimensions w/o pin

Pin securing method

SEM stage compatibility

AU-12-000214

EM-Tec P4

4

Ø31.5x10.5mm

Set screw

Standard 3.2mm pin

AU-12-000314

EM-Tec P4

4

Ø31.5x10.5mm

Set screw

M4 thread

AU-12-000517

EM-Tec P4

4

Ø31.5x10.5mm

Set screw

JEOL 32mm SEM stub

AU-12-000216

EM-Tec P6

6

Ø43x10.5mm

Set screw

Standard 3.2mm pin

AU-12-000316

EM-Tec P6

6

Ø43x10.5mm

Set screw

M4 thread

AU-12-000218

EM-Tec P8

8

Ø50x10.5mm

Set screw

Standard 3.2mm pin

AU-12-000318

EM-Tec P8

8

Ø50x10.5mm

Set screw

M4 thread

AU-12-000219

EM-Tec P12

12

Ø62x10.5mm

Set screw

Standard 3.2mm pin

AU-12-000319

EM-Tec P12

12

Ø62x10.5mm

Set screw

M4 thread

AU-12-000229

EM-Tec P29

29

Ø90x7mm

Internal spring

Standard 3.2mm pin

AU-12-000329

EM-Tec P29

29

Ø90x5mm

Internal spring

M4 thread

AU-12-000249*

EM-Tec P49

49

Ø117x7mm

Internal spring

Standard 3.2mm pin

AU-12-000349*

EM-Tec P49

49

Ø117x5mm

Internal spring

M4 thread

AU-12-000243

EM-Tec P3/45

3 x 45°

Ø25x14mm

Set screw

Standard 3.2mm pin

AU-12-000343

EM-Tec P3/45

3 x 45°

Ø25x14mm

Set screw

M4 thread

AU-12-000246

EM-Tec P6/45

6 x 45°

Ø35x14mm

Set screw

Standard 3.2mm pin

AU-12-000346

EM-Tec P6/45

6 x 45°

Ø35x14mm

Set Screw

M4 thread

AU-12-000237

EM-Tec P7

7x25.4

Ø78x15mm

Set Screw

Standard 3.2mm pin

AU-12-000337

EM-Tec P7

7x25.4

Ø78x15mm

Set Screw

M4 thread

*)  The 12-000214 EM-Tec P49 multi pin holder for 49 pin stubs can also serve as a platform to hold multiple specimen holders which have a standard pin.

 

Ordering Information for EM-Tec multiple pin stub holders for SEMs using pin stubs; FEI, Philips, Tescan,RJLee, AmRay, Cambridge Instruments, Leica, CamScan, Aspex, ETEC and Novascan SEMs.

Multiple pin stub holders

Page
per page

Showing Items 1-12 of 19

Set Descending Direction
Page
per page

Showing Items 1-12 of 19

Set Descending Direction