EM-Tec EBSD pre-tilt sample holders and sample holder kits

Order EBSD pre-tilt sample holder kits (pin)   |   OrderEBSD pre-tilt s sample holder kits (M4)


a few examples
EBSD pre-tilt examples

Introduction   

The EM-Tec EBSD pre-tilt sample holders all include a 70° pre-tilt angle to facilitate EBSD analysis. With a 70° pre-tilt angle there is no need to tilt the SEM sample stage.  Using 70° pre-tilted holders instead of tilting the SEM stage offer definite advantages:

  • Quicker sample loading
  • No “creep” of the SEM stage due to heavy samples
  • No interference of the SEM stage with detectors or polepiece
  • Sample is at the correct angle for EBSD analysis

The available EM-Tec EBSD sample holders with a 70° pre-tilt angle are:

  • EM-Tec P70  EBSD 70° pre-tilt holder for pin stubs and pin stub type sample holders, with pin
  • EM-Tec P70M  EBSD 70° pre-tilt holder for Hitachi M4 stubs and M4 threaded sample holders, with pin
  • EM-Tec P71  EBSD 70° pre-tilt sample holder kit for Ø25mm and 1" metallographic or petrographic mounts, with pin
  • EM-Tec P72  EBSD 70° pre-tilt sample holder kit for Ø30mm, Ø32mm and 1-1/4” metallographic or petrographic mounts, with pin
  • EM-Tec P73 EBSD 70° pre-tilt sample holder kit for up tp 48x28mm geological slides, with pin
  • EM-Tec H70P  EBSD 70° pre-tilt holder for pin stubs and pin stub type sample holders, M4 threaded hole
  • EM-Tec H70  EBSD 70° pre-tilt holder for Hitachi M4 stubs and M4 threaded holders, M4 threaded hole
  • EM-Tec H71  EBSD 70° pre-tilt sample holder kit for Ø25mm and 1” metallographic or petrographic mounts, M4 threaded hole
  • EM-Tec H72  EBSD 70° pre-tilt sample holder kit for Ø30mm, Ø32mm and 1-1/4” metallographic or petrographic mounts, M4 threaded hole
  • EM-Tec P73 EBSD 70° pre-tilt sample holder kit for up tp 48x28mm geological slides, M4 threaded hole

The EM-Tec EBSD sample holder kits combine a number of available EM-Te  holders: metallographic mount holders or geologocal slide holders with the EBSD 70° pre-tilt holder and a height extender for the 30mm/1-1/4” EBSD sample holder to provide clearance. The height extender can be easily removed if the stage adapter on the SEM stage does not require the use of height extender. The EM-Tec EBSD 70° pre-tilt holders are available with pin and M4 threaded hole.

→ Using a stub adapter for JEOL SEMs is only advised if there is enough height clearance or if the JEOL SEM has been converted to use pin stubs.

 

Capacity, size and compatibility of the EM-Tec pre-tilt and variable tilt holders:

Product #

Style

Tilt angle

Dimensions w/o pin

Stub /sample compatibility

Stage compatibility

AU-10-002270

P70

70° EBSD

Ø12.7x20mm

3.2mm pin stubs

3.2mm pin stub

AU-10-002274

P70M

70° EBSD

Ø12.7x20mm

Hitachi M4 thread

3.2mm pin stub

AU-12-000268

P71

70° EBSD

Ø34x38x29mm

Ø25mm / 1” mounts

3.2mm pin stub

AU-12-000269

P72

70° EBSD

Ø40x48x30mm

Ø32mm / Ø32mm / 1-1/4” mounts

3.2mm pin stub

AU-12-000272

P73

70° EBSD

52x32x25mm

48x28mm slides

3.2mm pin stub

AU-12-000370

H70P

70° EBSD

Ø12.7x20mm

3.2mm pin stubs

M4 thread

AU-12-000371

H70

70° EBSD

Ø12.7x20mm

Hitachi M4 thread

M4 thread

AU-12-000368

H71

70° EBSD

Ø34x38x29mm

Ø25mm / 1” mounts

M4 thread

AU-12-000369

H72

70° EBSD

Ø40x48x29mm

Ø32mm / Ø32mm / 1-1/4” mounts

M4 thread

AU-12-000372

H73

70° EBSD

52x32x259mm

48x28mm slides

M4 thread

Ordering Information for EM-Tec EBSD sample holders with 70° pre-tilt angle for SEMs using pin stubs; FEI, Philips, Zeiss, LEO Tescan, AmRay, Cambridge Instruments, Leica, and CamScan.

EBSD sample holders

Page
per page

Showing Items 1-12 of 29

Set Descending Direction
Page
per page

Showing Items 1-12 of 29

Set Descending Direction