HATA-Holder System
3-axis orientation alignment Tomography
High efficiency EDS Analysis
Easy to link with other tools by using cartridges
Accurate 3D visualization (By courtesy of : Prof. Hata, Prof. Mitsuhara )
HPT-Cu
Austenitic steel
AL-Mg-Si
In general, the crystal orientation is aligned by two tilt axis(X tilt + Y tilt or rotation), but X axis tilting, the crystal orientation is getting off axis.
Therefore, it is necessary for perfect alignment to apply not only Y tilting but also specimen rotation, it can be tilted at a high angle on pefect aligned crystal
orientation, and a beautiful 3D construction is possible by this tem holder system.
Multi Function Structure : Virtual pivot
High detection efficiency structure for EDS analysis
Free form X-ray shadowing
EDS detection efficiency is improved by the geometry of HATA-Holder
High Resolution EDS analytical performance test : Column mapping of SrTiO3
Double Tilt Cartridge Structure
Comparison Tomography between TEM and Atom probe Tomography
TEM Holder Specification
High-Angle Triple-Axis tem holder
Applicable instrument:
FEI Tecnai , Titan, JEOL HR pole piece type
Maximum X (α) tilt range +/-80°
( Limited by the gonio stage tilt angle. )
Maximum Y (β) tilt range +/- 7.50°
Supports high-resolution(see right image)
Double tilt + cartridge structure
Sample rotation (IDS / Flexa)
Maximum Rotation range +/-5.00°
Option +/-100°
( Controlled by Mel-Build IDS or Flexa )
Minimum step control of angle : 0.01°
Illumination for specimen
3-axis Rotation/Tilt TEM Holder
-
3-axis Rotation/Tilt TEM Holder for Tomography / High Efficiency EDS Sample Cartridge EnabledSKU: AU-MBHATA-004Units Per Package:From: $0.00Out of stock