JEOL Neoscope series basic SEM sample preparation supplies
Basic sample preparation supplies
Introduction
In addition to the SEM mounts and holders for the JEOL Neoscope series table top SEMs, basic SEM sample preparation supplies are necessary for optimum sample preparation and correct imaging and analysis. They are conveniently brought together on this page. Although the JEOL Neoscope table top SEMs include operation modes to avoid charging it is easier to work with conductive samples and samples which are grounded by using conductive adhesives. It is recommended to coat the surface of non-conductive sample with a thin layer of gold, using a sputter coater. When using images to generate data for measurements, it is recommended to calibrate to the system the system first with an EM-Tec magnification calibration standard.
Basic sample preparation supplies
The folowing recommended basic SEM sample preparation supplies for the Phenom can be conveniently ordered from this page. Additional information can be found on the relevant product pages.
- EM-Tec conductive silver paste or carbon paint to glue sample to sample stubs
- EM-Tec conductive copper SEM tape to make grounding paths
- EM-Tec Silicon finder grid for either multiple small samples or correlative microscopy
- Conductive tabs to adhere samples such as powder on sample stubs
- EM-Tec stub gripper tweezers for the Ø9.5, Ø12.2 and Ø25mm JEOL cylinder sample stubs
- EM-Tec preparation stands for the JEOL cylinder stubs
- Value-Tec sample preparation tweezers
- Value-Tec dust blower
- Micro-Tec disposable scalpels
- Micro-Tec white PE PrepBoard
- Micro-Tec fine needlesor preparing smaller samples
- Micro-Tec fine probes for preparing smaller samples
Calibration tools for the Hitachi TEM series table top SEMs
Recommended calibration tools for imaging and EDX analysis with the Hitachi TM series table top SEMs are:
- EM-Tec MCS-1TR magnification calibration standard on pin stub #AU-31-T31000-8
- Micro-Tec MTC-5 multiple target graticule calibration standard #AAU-31-T33600-9
- EM-Tec CSX-5C light element and EDX calibration standard #AU-36-000505 (needs #AU-11-000523)
See related product list below
JEOL NeoScope basic supplies
-
EM-Tec AG42 strong and highly conductive silver cement, 25g bottleSKU: AU-15-002142Units Per Package: 1From: $173.71
-
EM-Tec multi stub preparation stand for 8 JEOL or Hitachi Ø25mm stubsSKU: AU-15-007508Units Per Package: 1From: $42.04
-
EM-Tec multi stub preparation stand for 28 JEOL 9.5mm stubsSKU: AU-15-007527Units Per Package: 1From: $43.91
-
EM-Tec multi stub preparation stand for 28 JEOL 12.2mm stubsSKU: AU-15-007528Units Per Package: 1From: $43.91
-
-
EM-Tec 95.AM SEM stub gripper tweezers for Ø9.5mm cylinder stubs, anti-magnetic stainless steelSKU: AU-50-050110Units Per Package: 1From: $21.49
-
EM-Tec 122.AM SEM stub gripper tweezers for Ø12.2mm cylinder stubs, anti-magnetic stainless steelSKU: AU-50-050112Units Per Package: 1From: $21.49
-
EM-Tec 250.AM SEM stub gripper tweezers for Ø25mm cylinder stubs, anti-magnetic stainless steelSKU: AU-50-050250Units Per Package: 1From: $23.35
-
EM-Tec J25P JEOL Ø25mm adapter for pin stubs, Ø25x10mmSKU: AU-11-000523Units Per Package: 1From: $40.17
-
EM-Tec SB23 pin stub storage box for 23 pin stubs with an LDPE insert.SKU: AU-13-090024Units Per Package: 1From: $15.08
-
EM-Tec SB153 high capacity clear styrene box for 153 standard 12.7mm pin stubsSKU: AU-13-090153Units Per Package: 1From: $89.09
-
EM-Tec single sided conductive copper SEM tape 25mm x 30mSKU: AU-15-000125Units Per Package: 1From: $37.37