EM-Tec LAMC-15 large area magnification calibration standards
ideal for low magnifications, large areas, microscope stages and digital imaging systems

Order EM-Tec LAMC-15 large area magnification calibration standards  

Introduction

The unique EM-Tec LAMC-15 calibration standard has been designed for large area and low magnification calibration. It is constructed using an ultra-flat conductive silicon substrate with bright chromium deposited lines. Ideal for SEM and reflected light microscopy with the following applications:

  • low magnification calibration
  • large area magnification calibration
  • particle analysis measurements
  • GSR measurements
  • microscope stage linearity and reproducibility measurements
  • digital imaging systems

The EM-Tec LAMC-15 is useful in the 5-1000x magnification range. The patterns on this calibration standard are:

  • cross grating of 15x15mm with 0.01mm divisions
  • 15mm grating lines with 0.01mm divisions on opposite ends
  • cross hairs at each 0.1mm interval
  • larger cross hairs at each 1mm interval

The cross hairs allow for easy navigation and for testing the linearity of both low magnification imaging and the backlash on a (motorised) microscope stage. The deposited Cr lines are in the same focus plane as the substrate, are better defined and provide more signal than etched patterns. They are also less prone to accumulate dust particles in the patterns. Each of the calibration standards has a unique product ID serial number etched on the die. Available as unmounted or mounted on popular SEM sample stubs or black metal slide. Use an EM-Tec SEM stub adapter if you wish to use this calibration standard on multiple SEM platforms. The EM-Tec LAMC-15 is a NIST traceable magnification calibration standard. Example of wafer level certificate of traceability which is supplied with each Em-Tec LAMC-15.


Specifications for the EM-Tec LAMC-15 large area magnification calibration standard

Substrate 525µm thick boron doped ultra-flat wafer with <100> orientation
Conductive  Excellent; 5-10 Ohm resistivity
Patterns  Graticules, lines and fiducials
Pattern size 15 x 15mm
Lines  75nm thick, pure bright chromium lines
Divisions 0.01mm, 0.1mm and 1.0mm
Die size 17 x 17mm
Application   SEM, Reflective light, stereo microscopes, optical imaging systems
Identification Product ID with serial number etched
Mounting  Unmounted, mounting optionally available
Supplied Supplied in a Gel-Pak box

 

  EM-Tec LAMC-15 large area maginfication calibration standard
     

LAMC-15 Low Mag.

per page

1 Item

Set Descending Direction
per page

1 Item

Set Descending Direction