Kapton polyimide tapes
Single sided Kapton tapes | Double sided Kapton tapes
Single sided Kapton tapes
The single sided Kapton tape consists of a Kapton polyimide film with a silicon adhesive. The tape is self wound without a liner. Advantages of the Kapton tape are:
- wide temperature range use
- heat resistant
- good adhesion properties on difficult surfaces
- low adhesive transfer
- leaves cleaner surfaces after removal
- low outgassing under vacuum
If used as temporary tape or transfer tape, only apply minimum pressure. The Kapton tape has low outgassing properties and is an ideal tape for high vacuum aplications. Excellent performance for electrical and thermal insulation with high dielectric strength. Although the use temperature range is specified as -75 to +260°C, Kapton has been successfully used in the temperature range of -196 to +400°C.
Applications are wide ranging for this tape:
- masking on printed circuit boards during soldering
- masking for vacuum deposition
- holding samples or part in high vacuum
- positioning tape for cryo applications
- electrical insulation on transformers, coil and electro motors.
→ Available in widths from 6 to 50mm with a length of 33m. Clean 76mm diameter plastic core.
Specifications:
Tape material |
Kapton Polyimide |
Adhesive | Silicone adhesive |
Color | Amber to brown |
Film thickness | 0.03mm |
Adhesive thickness | 0.04mm |
Total tape thickness | 0.07mm |
Adhesive strength | 26N / 25mm |
Tape strength | 200 kPa |
Dielectric strength | 8 kV |
Chemical resistance | Excellent to acids, oils and solvents |
Use temperature range | -75 to +260 °C |
Length | 33m |
Core diameter | 76mm (3”) |
Double sided polyimide heat resistant tapes
The double sided polyimide tape consists of a polyimide film with silicon adhesive on both sides. The tape is wound between two polyester liners. The two liners make clean handling of the tape easy: unwind the tape from the first liner and leave on the second liner. Apply tape and remove second liner. Advantages of the polyimide tape are:
- heat resistant
- can be used over a wide temperature range
- excellent adhesion on difficult surfaces
- minimal adhesive transfer
- vacuum compatible
- temporary sample holding / positioning
When used as a temporary tape or transfer tape, avoid pressing down on the tape. Due to its low outgassing properties the double sided polyimide tape is a ideal for high vacuum aplications for sample processing. Excellent electrical and thermal insulation properties with a high dielectric strength. Although the use temperature range is specified as -75 to +260°C, polyimide tape has been successfully used in the temperature range of -196 to +400°C.
Applications for double side polyimide tape are:
- holding samples for vacuum deposition
- holding TEM grid during deposition and processing
- positioning tape for cryo applications
- masking in high temperature environments
- electrical insulation on transformers, coil and electro motors.
→ Available in widths of 5, 10 and 20mm with a length of 20m. Clean 76mm diameter plastic core.
Specifications:
Tape material |
Polyimide |
Adhesive | Silicone adhesive |
Color | Amber to brown |
Film thickness | 0.03mm |
Adhesive thickness | 0.04mm (2x) |
Total tape thickness | 0.11mm |
Liner thickness | 0.12 (2x0.06) |
Adhesive strength | 26N / 25mm |
Tape strength | 200 kPa |
Dielectric strength | 6.5 kV |
Chemical resistance | Excellent to acids, oils and solvents |
Use temperature range | -75 to +260 °C |
Length | 20m |
Core diameter | 76mm (3”) |
Kapton Tape
-
Single sided polyimide (Kapton) tape, standard 0.06mm thickness, 33m longSKU: AU-71-0001XXUnits Per Package: 1From: $7.95
-
Single sided polyimide (Kapton) tape, 0.08mm thickness, 3mm x 33mSKU: AU-71-004103Units Per Package: 1From: $13.88
-
Single sided polyimide (Kapton) tape, 0.08mm thickness, 6mm x 33mSKU: AU-71-004106Units Per Package: 1From: $22.42
-
Single sided polyimide (Kapton) tape, 0.08mm thickness, 12mm x 33mSKU: AU-71-004112Units Per Package: 1From: $41.10
-
Single sided polyimide (Kapton) tape, 0.08mm thickness, 25mm x 33mSKU: AU-71-004125Units Per Package: 1From: $74.73
-
Single sided polyimide (Kapton) tape, 0.08mm thickness, 50mm x 33mSKU: AU-71-004150Units Per Package: 1From: $128.11
-
Single sided polyimide (Kapton) tape, 0.12mm thickness, 3mm x 33mSKU: AU-71-007103Units Per Package: 1From: $15.48
-
Single sided polyimide (Kapton) tape, 0.12mm thickness, 6mm x 33mSKU: AU-71-007106Units Per Package: 1From: $25.09
-
Single sided polyimide (Kapton) tape, 0.12mm thickness, 12mm x 33mSKU: AU-71-007112Units Per Package: 1From: $45.91
-
Single sided polyimide (Kapton) tape, 0.12mm thickness, 25mm x 33mSKU: AU-71-007125Units Per Package: 1From: $84.87
-
Single sided polyimide (Kapton) tape, 0.12mm thickness, 50mm x 33mSKU: AU-71-007150Units Per Package: 1From: $165.48
-
Low static single sided polyimide (Kapton) tape, 3mm x 33mSKU: AU-71-009103Units Per Package: 1From: $13.88